Every metal medal must be made and carved with heart. The effect of metal medal production directly affects the quality of sales, so the production of metal medals is the key. How are metal medals formed? Let's take a look at it together.

How are metal medals formed?

       The mechanical forming process is widely used in the production of metal medals, which is closely related to the characteristics of the material. The production of metal medals usually uses stainless steel, which has a high melting point and is difficult to cast. However, the stainless steel used for metal medals has low hardness and has certain plastic processing Performance, using appropriate mechanical processing parameters and processing equipment, can obtain high-quality metal medals. The following is the forming process of metal medals:

       The use of lathes to directly process stainless steel metal profiles into medals is the most common in shank and bracelet medals, accounting for a large proportion. They are stainless steel shank and Qin alloy shank turned by lathe. Due to the respective material characteristics of stainless steel and titanium alloy, there are certain difficulties in turning. It is necessary to select and formulate corresponding processing parameters according to the characteristics of the material to ensure the processing accuracy and surface quality of the medal.

Some friends in the basin have encountered difficulties in stainless steel cutting, don’t know what to do? Now we will analyze the reasons for the difficulties in stainless steel cutting and hope to help you:

      1. The thermal conductivity is low and the cutting heat cannot be dissipated in time. The heat transferred to the tool can reach 20%, and the cutting edge of the tool is easy to overheat and lose the cutting ability.

      2. The chip has strong adhesion and is prone to knife edge. Stainless steel has high adhesion, which will cause the material to "stick" on the tool during turning, resulting in "knife edge".

      3. Chips are not easy to break. In the metal cutting process, the forming process of plastic material (ductile material) chips has undergone four stages of extrusion, slippage, cracking and separation.

      4. The work hardening tendency is strong, which makes the tool easy to wear. The processing tendency of stainless steel is relatively strong, the hardness of the work hardening layer is high, and it has a certain depth of work hardening, which increases the processing difficulty and tool wear.

The production of metal medals should not only emphasize quality, but now people pay more attention to the meaning of medals and the meaning of such production. Medals are originally a special product, with its senior and special significance. Therefore, the meaning of medal production must be positive and motivate people to work hard. Medals are originally a reward and an incentive for successful people.